[SOLVED]Logging multiple temp sensors questions(step by step)

Using Arduino Programming Questions
38

yes.

this is not commented out:

 byte getPage(IPAddress ipBuf,char *page)
{
  int inChar;
  char outBuf[128];

  Serial.print(F("connecting..."));

  if(client.connect(ipBuf,80))
  {
    Serial.println(F("connected"));

    sprintf(outBuf,"GET %s HTTP/1.0\r\n\r\n",page);
    client.write(outBuf);
  } 
  else
  {
    Serial.println(F("failed"));
    return 0;
  }

  // connectLoop controls the hardware fail timeout
  int connectLoop = 0;

  while(client.connected())
  {
    while(client.available())
    {
      inChar = client.read();
      Serial.write(inChar);
      // set connectLoop to zero if a packet arrives
      connectLoop = 0;
    }

    connectLoop++;

    // if more than 10000 milliseconds since the last packet
    if(connectLoop > 10000)
    {
      // then close the connection from this end.
      Serial.println();
      Serial.println(F("Timeout"));
      client.stop();
    }
    // this is a delay for the connectLoop timing
    delay(1);
  }

  Serial.println();

  Serial.println(F("disconnecting."));
  // close client end
  client.stop();

  return 1;
}