SSC-32 servo controller firmware source code!

Projects Discussion and Showcase Robotics
1

Here you fill find the source code of the SSC-32 servo controller firmware and bootloader! I know that people are not able to find these files because they don't allow any more to download them..but you can download them from here! SSC-32 is a great board to use with Arduino!

Download SSC-32 firmware source code for (Atmega8 and Atmega168) from here:
(links removed by administrator)

Download SSC-32 bootloader source code (Atmega8 and Atmega168) from here:

(links removed by administrator)

2

I have removed the links because the source code is not open source.

Unless you have written permission from Lynxmotion to distribute the code you can't link it
from here.

m

3

acording http://www.lynxmotion.net/viewtopic.php?f=3&t=7313
http://www.hexapodrobot.com/forum/viewtopic.php?f=25&p=5328
ssc-32 open sorce

4

It was NOT open source when this post was made.
And according to the post, they plan to reinstate the open source source status, so it is not open source YET