mini arduino pcb single side

Pitusso, visto che Easyduino era stato postato sul forum qui:
http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1293285322

credo che tu possa tranquillamente allegare direttamente i file qui sul forum, in questo stesso post, in modo da tenerli tutti a disposizione.
Grazie

If you post your schematic I help you develop a single sided layout. I am very good with eagle. Please say how wide you want the traces, if part leads need to go thru board or if they need to be surface mount, and any other good details.

Ecco EasyDuino nel suo splendore, a memoria del lavoro di Marco Ritrivi (appropos: donde sei finito?)

EasyDuino è la vera e propria e unica EasyDuino.
ICSP è lo shield per la programmazione via ICSP, RS232 è lo shield per la programmazione via seriale.

Easyduino1-0.zip (92.6 KB)

ICSP1-0.zip (9.8 KB)

RS232.zip (55.1 KB)

thanks

http://fritzing.org/shop/fab/
:wink:

Is this small enough?
Single sided too.

Nice work

CrossRoads:
Is this small enough?
Single sided too.

Very interesting, eagle sch and brd is available?
Thanks

CrossRoads:
Is this small enough?
Single sided too.

amazing :slight_smile: it's perfect

@pitusso

Grazie infinite, era un secolo che la cercavo :slight_smile:

That was done with expresspcb.com s/w, I can do as eagle in a few minutes.

Single Sided DIP with power LED, activity LED (D13), and JTDI interface connector.

DIP_single_sided.png

mini-uino_DIP_single_sided.sch (283 KB)

mini-uino_DIP_single_sided.brd (27.5 KB)

CrossRoads:
Single Sided DIP with power LED, activity LED (D13), and JTDI interface connector.

Good job made by a good men!
But, brd file doesen't the same of your picture .
Something wrong ?

Thanks the same for sharing ! A lot of time saved for us!

This look line a Colombo's egg in this moment for me!

But, brd file doesen't the same of your picture .

I will check that when I get home. the "DIP_single_sided.png" was exported from "mini-uino_DIP_single_sided.brd" , I don't know why they wouldn't match.

non ho bene capito:
volete averlo piccolissimo :
http://www.solarbotics.com/products/kardw/
o a singola faccia:

Ciao Uwe

Here is the correct .brd file.

mini-uino_DIP_single_sided.brd (21.3 KB)

Uh... I was forgetting that several months ago I designed a mini Arduino too XD
I called it uDuino, that stands for "microDuino".

Here is the board:

uDuino.png

Looks nice Leo. Kal's original post indicated a desire for single sided, which makes it a little trickier.

Does the uDuino work well without power supply caps and reset line pullup resistor? Or do you add them as external parts?

I never built it.
It was a proof-of-concept for a forum's member that asked for a minimal board. The components you noticed are missing were not necessary 'cause the power supply was provided by the main board.

uwefed:
non ho bene capito:
volete averlo piccolissimo :
http://www.solarbotics.com/products/kardw/
o a singola faccia:
http://arduino.cc/en/Main/ArduinoBoardSerialSingleSided3
Ciao Uwe

a me personalmente serviva un progetto di un arduino singola faccia con il minimo indispensabile per funzionare, come ad esempio questo: http://arduino.cc/en/uploads/Main/arduinobb_11.jpg portato su eagle.
Una cosa da cui poi sia semplice partire per creare un nuovo progetto con arduino, quindi ad esempio che abbia i pin che finiscono all'esterno del pcb così se voglio attarci un led o un'altra cosa è semplice anche per chi come me non sa usare bene eagle :slight_smile:
E colgo l'occasione per ringraziare CrossRoads e pitusso per il loro aiuto :slight_smile: