Go Down

Topic: Program for getting live data from Arduino through HC-05 in Matlab (Read 470 times) previous topic - next topic

manatom

I know, this must be a very simply program. Can somebody tell me the program required to get live data transferred from HC-05 Bluetooth module to the mat-lab software. Mine is an IMU sensor and thus there will be 6 different dimensional values. Thank you.

mart256

Its not simple. Does your pc has bluetooth? Does matlab have access to that bluetooth module?

manatom

Yes, I'm using a laptop and it has Bluetooth facility. I'm planning to download Matlab R2015a. Would you suggest any other software for showing the transferred data.

MadhuGovindarajan

This link should help you with MATLAB Bluetooth connectivity - http://www.mathworks.com/help/instrument/bluetooth-communication.html

manatom

I've seen that link, i want a MATLAB program for showing up the results. I've no background of programming.

Robin2

Buetooth is basically just serial-by-wireless.

First get Matlab to communicate with your Arduino over the USB cable then it should not be difficult to develop that so that it works with Bluetooth.

I don't know Matlab but if you post your Arduino code I can try to help with that.

...R
Serial Input Basics
Two or three hours spent thinking and reading documentation solves most programming problems.

manatom

I'm using the available online code by jeff rowberg. I'm not good at programming, if you can help me with any other method to analyze the transferred data from HC-05 other than Mat-lab, it would be great. Thanks.

link: https://github.com/jrowberg/i2cdevlib/tree/master/Arduino/MPU6050

mart256

I've seen that link, i want a MATLAB program for showing up the results. I've no background of programming.
I see two choices here:

Take a time to learn to program. It will be very useful.

Or, pay someone to write the program.

Go Up