Aack, I was trying to avoid that. Not enough hours in the day to take on another project.
I've got 1751303 layed out now from the con-phoenix-350 library, I really just want some assurance that the 1984675 are the same for holes, as the outline seems to be 0.3" front to back (laying one over the top of some known 0.1" spaced holes), which should be enough room for the 7mm shown on page 4 of the drawing. (0.3" = 7.62mm, which looks like the width with the protruding wireguide, the footprint itself is just 7mm.)