how to attach 3 sensor on one arduino robot

hye..I have arduino project in mu college.so,my team decide to put 3 sensor on my robot.but,i dont know how to tied them..pleaseeee,help me

So we know, almost, what you want to put them on. What 3 sensors do you want to attach?

sensor HC-SR04...PLEASEE

How do I connect the HC-SR04 sensor to the official arduino robot?

glue?

I'm very new to all this so some guidance would be appreciated. I want to connect an ultrasonic sensor to the official arduino robot

Are you using a servo to turn the ultrasonic sensor on the arduino robot?
Like this: Kingduino 4WD Ultrasonic Robot Kit in Hobbyking

No, well I'm just looking to connect the sensor in some way first and I don't know how.

How could I connect the HC-SR04 to http://store.qkits.com/assets/images/arduino-robot-2.jpg

How could I connect the HC-SR04 to http://store.qkits.com/assets/images/arduino-robot-2.jpg

Electrically or Mechanically ?

Electrically

So that it can communicate with that top board (control board)

I don't have the Arduino Robot so I can't tell you just how to do it. Maybe someone who has this can help. This link may give you the information.

Hey Amirah

I don't know if you ended up solving this problem or not, but here's a couple of links that might help.

They mainly deal with the arrangement of digital pins on the Arduino Robot. If you search how to attach the sensor onto an UNO, you should be able to use the same method with the corresponding digital pins on the robot.

Hope that helps.