Way back I bought one of the Ethernet cards from Freetronics. It is called an "Eleven" when plugged in.
Alas because of the size of the RJ45 socket, I had to buy another card for the project.
Until now, I have not really used it.
Things have changed.
My watering project is becoming closer and closer.
In the mean time I have found an "Automatic blind controller" which uses an Ethernet card.
Ok, I will use it. It will also be handy once I get my watering system going. Instead of buttons, etc, I will make a simple web page.
2 birds, I think is the saying.
I load the sketch, and plug in the card.
Look at the available cards, and there is no "Freetronics eleven" listed.
Device manager shows it and I have installed "their" drivers. Both the USB one and the Freetronics eleven.inf file.
Nothing.
So sorry, but what is wrong?