Can an Atmega328 +oscillator run off of 3.7 volts without a regulator to be used for 7 channel pulse width modulation with mosfets to drive the leds? I'm desiring to power it with an 18650 battery. (which charges to 4.2 volts and drains to 2.75 volts) http://www.dealextreme.com/details.dx/sku.5790 …

Atmega328 powered by a 3.7 volt battery?

smeezekitty January 21, 2011, 8:49pm 12

My arduino works down to 2.5v before randomly resetting.

Topic		Replies	Views
Atmega328P-PU powering with 18650 battery Project Guidance	7	923	October 27, 2021
Using internal 8MHz oscillator at 3.3V? Hardware	6	745	September 1, 2021
Change the oscillator from 16MHz to 8MHz Microcontrollers	7	535	March 2, 2023
Atmega328 powered by 3.7v lipo General Electronics	17	20683	May 6, 2021
Running Arduino Pro Mini 5V,16MHz board @ 3.3V Project Guidance	68	19473	May 5, 2021