Thanks wildbill,
I took it out:
#include <SPI.h>
#include <Ethernet.h>
#include <OneWire.h>
#include <DallasTemperature.h>
#include <RCSwitch.h>
#include <Time.h>
#include <TimeAlarms.h>
#define ONE_WIRE_BUS 3
#define TEMPERATURE_PRECISION 12
float tempC;
OneWire oneWire(ONE_WIRE_BUS); // setup a onewire instance to communicate with any onewire devices
DallasTemperature sensors(&oneWire); // pass onewire reference to Dallas Temperature
RCSwitch mySwitch = RCSwitch();
DeviceAddress TN = { 0x28, 0x44, 0x33, 0x9D, 0x01, 0x00, 0x00, 0xAA };
DeviceAddress TO = { 0x28, 0x49, 0x45, 0x9D, 0x01, 0x00, 0x00, 0x11 };
DeviceAddress TP = { 0x28, 0xAE, 0x2E, 0x9D, 0x01, 0x00, 0x00, 0xDC };
DeviceAddress TV = { 0x28, 0xB7, 0x22, 0x9D, 0x01, 0x00, 0x00, 0x30 };
DeviceAddress TOUT = { 0x28, 0x3E, 0x3B, 0x9D, 0x01, 0x00, 0x00, 0xC3 };
byte mac[] = { 0x90, 0xA2, 0xDA, 0x00, 0x8D, 0x42 };
byte ip[] = { 192, 168, 1, 104 };
byte gateway[] = { 192, 168, 1, 1 };
byte subnet[] = { 255, 255, 255, 0 };
EthernetServer server(80);
int vedpin = 5; // ventilation pin
int heatpin = 6; // heating pin
int prdpin = 7; // program/mode pin
int gatepin = 8; // gate opener pin
int sensorPin = A0; // light sensing analog
int sensorValue = 0; // integer for the analog sensor
int PIRstate = 0; // variable for PIR sensor status
int llight = 9;
int PIR = 14; // PIR
int motorlevel = 0; // motor
String readString = String(30); // string for fetching data from address
boolean GADON = false; // status flag gate
boolean HEDON = false; // status flag heating
boolean PRDON = false; // status flag ventilation program
boolean VEDON = false; // status flag ventilation
boolean LLIGHT = false; // status flag livingroom ligh
void setup()
{
Serial.begin(9600);
Ethernet.begin(mac, ip, gateway, subnet );
server.begin();
//******************************************time and alarm set********************************************
setTime(18,00,00,3,7,13); // time from arduino
Alarm.alarmRepeat(6,30,00, M1 );
Alarm.alarmRepeat(7,30,05, M2 );
Alarm.alarmRepeat(8,30,10, D1 );
Alarm.alarmRepeat(9,30,15, D2 );
Alarm.alarmRepeat(14,30,20, D3 );
mySwitch.enableTransmit(9); // transmitter is connected to arduino Pin #9
mySwitch.setPulseLength(360); // pulse length
pinMode(gatepin, OUTPUT);
pinMode(heatpin, OUTPUT);
pinMode(prdpin, OUTPUT);
pinMode(vedpin, OUTPUT);
pinMode(llight, OUTPUT);
pinMode(PIR, INPUT);
//tu bolo byte client_ip[4];
sensors.begin();
sensors.setResolution(TN, TEMPERATURE_PRECISION);
sensors.setResolution(TO, TEMPERATURE_PRECISION);
sensors.setResolution(TP, TEMPERATURE_PRECISION);
sensors.setResolution(TV, TEMPERATURE_PRECISION);
sensors.setResolution(TOUT, TEMPERATURE_PRECISION);
}
void getTemperature(DeviceAddress deviceAddress) // function to get the temperature for a device
{
tempC = sensors.getTempC(deviceAddress);
sensorValue = analogRead(sensorPin);
}
digitalClockDisplay();
Alarm.delay(1000); // wait one second between clock display
}
void M1(){
digitalWrite (vedpin,HIGH);
}
void M2(){
digitalWrite (vedpin,LOW);
}
void D1(){
digitalWrite (vedpin,HIGH);
}
void D2(){
digitalWrite (vedpin,LOW);
}
void D3(){
digitalWrite (vedpin,LOW);
}
but I still have some error at lines:
digitalClockDisplay();
Alarm.delay(1000); // wait one second between clock display
It says:
Workingcode6m13:91: error: expected constructor, destructor, or type conversion before ';' token
Workingcode6m13:92: error: expected constructor, destructor, or type conversion before '.' token
Workingcode6m13:93: error: expected declaration before '}' token