I built a project with an Atmega328 on a copper protoboard and all the circuitry on it works out fine except this one anomaly... I have two leads coming off the board that attach to a 5v regulator which powers the whole project. I have an arduino board I attached to a 9v power supply (9v 650mA, sp…

Power supply troubles

CrossRoads August 27, 2011, 6:16am 3

Is NTE960 a DC output? Or AC? You need a DC output regulator.
Also 100nF caps on the ATMega VCC pins if you don't have them already.

Topic		Replies	Views
newbie - What's the best way to power the Arduino Uno? IDE 1.x	8	1605	May 5, 2021
Uno external power supply problem IDE 1.x	8	2005	May 5, 2021
Solved my own problem, but would like some verification: voltage regulators General Electronics	13	3768	May 6, 2021
Arduino Uno does not power up through Vin or power jack (works fine with USB) IDE 1.x	4	2772	May 5, 2021
Output Voltages differ for different power supplies to the arduino. IDE 1.x	7	1960	May 5, 2021