Projet domotique : teleinfo + 4 relais + T°C 1wire

Forum 2005-2010 (read only) International Français
12 
void OneWireReset(int Pin) // reset.  Should improve to act as a presence pulse
{
     digitalWrite(Pin, LOW);
     pinMode(Pin, OUTPUT); // bring low for 500 us
     delayMicroseconds(500);
     pinMode(Pin, INPUT);
     delayMicroseconds(500);
}

void OneWireOutByte(int Pin, byte d) // output byte d (least sig bit first).
{
   byte n;

   for(n=8; n!=0; n--)
   {
      if ((d & 0x01) == 1)  // test least sig bit
      {
         digitalWrite(Pin, LOW);
         pinMode(Pin, OUTPUT);
         delayMicroseconds(5);
         pinMode(Pin, INPUT);
         delayMicroseconds(60);
      }
      else
      {
         digitalWrite(Pin, LOW);
         pinMode(Pin, OUTPUT);
         delayMicroseconds(60);
         pinMode(Pin, INPUT);
      }

      d=d>>1; // now the next bit is in the least sig bit position.
   }
   
}

byte OneWireInByte(int Pin) // read byte, least sig byte first
{
    byte d, n, b;

    for (n=0; n<8; n++)
    {
        digitalWrite(Pin, LOW);
        pinMode(Pin, OUTPUT);
        delayMicroseconds(5);
        pinMode(Pin, INPUT);
        delayMicroseconds(5);
        b = digitalRead(Pin);
        delayMicroseconds(50);
        d = (d >> 1) | (b<<7); // shift d to right and insert b in most sig bit position
    }
    return(d);
}


void getCurrentTemp(char *temp)
{  
  int HighByte, LowByte, TReading, Tc_100, sign, whole, fract;

  OneWireReset(TEMP_PIN);
  OneWireOutByte(TEMP_PIN, 0xcc);
  OneWireOutByte(TEMP_PIN, 0x44); // perform temperature conversion, strong pullup for one sec

  OneWireReset(TEMP_PIN);
  OneWireOutByte(TEMP_PIN, 0xcc);
  OneWireOutByte(TEMP_PIN, 0xbe);

  LowByte = OneWireInByte(TEMP_PIN);
  HighByte = OneWireInByte(TEMP_PIN);
  TReading = (HighByte << 8) + LowByte;
  sign = TReading & 0x8000;  // test most sig bit
  if (sign) // negative
  {
    TReading = (TReading ^ 0xffff) + 1; // 2's comp
  }
  Tc_100 = (6 * TReading) + TReading / 4;    // multiply by (100 * 0.0625) or 6.25

  whole = Tc_100 / 100;  // separate off the whole and fractional portions
  fract = Tc_100 % 100;


      if(sign) temp[0]='-';
      else              temp[0]='+';
      
        if(whole/100==0)
           temp[1] =' ';
        else
        temp[1]= whole/100+'0';
      temp[2]= (whole-(whole/100)*100)/10 +'0' ;
      temp[3]= whole-(whole/10)*10 +'0';
      
      temp[4]='.';
      temp[5]=fract/10 +'0';
      temp[6]=fract-(fract/10)*10 +'0';
      
      temp[7] = '\0';


      
}

Celui là je pense le mettre tout à la fin.

Voilà, vous en pensez quoi ? des erreurs ?

PS : après, je verrai pour les relais ON/OFF simple.