Since I doesn't get any response from the module I am wondering if I'm supposed to wait for a satellite signal. I have given it some time, but nothing happens.
Can some of you bright guys tell me if the adafruit-test is idiot-proof and I just have to wait for a signal, or if it is missing some information to ignorants like me?
I am aware that the module will have a hard time, connecting with the satellites indors. The problem is, that I don't get any response from the GPS whatsoever. Acording to the command set (
At first it looks like rubbish, but if I change the baud-rate manually in the serial terminal, it spells "Adafruit MTK3329 NMEA test!" as expected. But nothing else happens. Anyways, I should be able to at least see something in the terminal, even though the baud rate is initailly wrong?
There are 2 baud rates one for the serial monitor and one for the GPS device, when you see the Adafrui... message the serial monitor baud rate is correct... what of the other.?
Yes. I don't really know the limitations. What I observe if I set the GPS to 115200 is jibberish in the serial monitor (as though the baud rate were wrong).