There is no types.h in library-0019.

I had the same problem with the UdpBytewise library. All I did for now was use version 0018 until I figure it out. :stuck_out_tongue:

http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1281603077

described a similar error that went away when Dhcp was added to the ethernet library. Could this be the problem?

Hello! Egoblitz and jrraines.

Thank you for the comment.

DHCP library and EthernetDHCP doesn't correspond to 0019.
I modified EthernetDHCP and arduino-0019(w5100.cpp, w5100.h), it corresponded.
It corresponded to arduino-0020, too.

I will report on the change to the author.

May I write the change here?

Should I write the change here?

EthernetDHCP
http://gkaindl.com/software/arduino-ethernet

Hi everyone!

I'm the author of the EthernetDHCP library. I'll promise to eventually push out an update that's compatible with 0019+, it's just that I'm currently extremely short on time and that the significant change of the Ethernet and SPI libs between 0018 and 0019 was entirely unexpected for me.

Kiku, let me thank you again for your work to port EthernetDHCP too 0019+, and yes, please feel free to go ahead and post your changes here, so that others can use them.

Other than that, please use 0018 for now (You can still download it at Arduino.cc), since it might still be a week or two until I have some spare time again.

Thanks!

I modified EthernetDHCP and arduino-0021(w5100.cpp, w5100.h), it corresponded.

Please transmit the message if necessary.

kiku, the updated DHCP library for the current versions of Arduino would be incredibly helpful. Can you please post it (or send me a copy)?

Thanks!

hi kiku, could u send me a copy too (arduino 0021 version)?
thanks ..

Hi dsk and rnewbie.

I'm sorry. The reply has slowed.
Mail was sent.

Hi kiku
Could you also please send me a copy of the EthernetDHCP changed lib?
Thanks :slight_smile:

Rechena

Hi Rechena.

Mail was sent.

Hi, any updates?
kiku, do you mind posting your changes here?
Thanks!

Thanks for the mail with the DHCP but I still cant make it work :S
Still missing something.

Do I have to put some of the .h and .cpp inside the Original Ethernet Lib?

Thanks for the help.

Regards
Rechena

Hi kiku

Could you please send me a copy of the EthernetDHCP library you've modified for compatibility with Arduino-0021.

Thanks
Simon

Kiku, I'd also appreciate a copy of what you've done. It'll save me time :slight_smile:

Thanks in advance.

Hello, KineticaRT.
Mail was sent.

Hi kiku, it would be really great if you could post it here for everyone to see. :slight_smile:
Cheers!

Hello, andre!

Thank you for the message.

Sorry, it is not possible to write because I do not have time now. :cry:

It sends it with mail if necessary.
And, if you write here, I am glad. :stuck_out_tongue:

Hi, Rechena.

The original is necessary.

My Ethernet folder [ch65381][ch65381][ch65381]

\Ethernet
Client.cpp
Client.h
Ethernet.cpp
Ethernet.h
EthernetDHCP.cpp
EthernetDHCP.h
Server.cpp
Server.h
Udp.cpp
Udp.h

\Ethernet\utility
EthernetDhcpUtil.c
EthernetDhcpUtil.h
socket.cpp
socket.h
w5100.cpp
w5100.h
MyTypes1.h
MyTypes2.h

Hi, David Lucas.
Mail was sent.

Hi kiku,
yes, please send it to me by email and I'll repost it here.