Hi I've got a ATmega162(from my x0xb0x) without a bootloader. Can I use the Uno as a ISP to put the bootloader on the 162? I've got the bootloader hex file but I dont know how to put it on. Could anybody please help me out?

uno as ISP bootloader for a ATmega162

TCWORLD June 18, 2012, 10:31am 3

From when i did it,

SCLK = Pin8
MISO = Pin7
MOSI = Pin6
RESET = Pin9
VCC = Pin40
GND = Pin20

XTAL1 = Pin19
XTAL2 = Pin18

I used an uno to upload it as suggested above.

Topic		Replies	Views
Arduino Uno as ISP for programming ATmega16-L (without bootloader) Microcontrollers	21	10180	May 6, 2021
Arduino Bootloader for atmega 128 Microcontrollers	12	23545	May 6, 2021
Arduino as ISP Programmer, but using different pins Microcontrollers	20	7070	May 6, 2021
Uno as ISP. IDE 1.x	3	1627	May 5, 2021
arduino uno as ISP for blank atmega and non arduino firmware Project Guidance	2	596	May 5, 2021