I hope it works for you
When I released the Arduino integration files (board profile etc) I did not realise that an Arduino-developers pin mapping existed so I'm creating another set of Arduino files which will:
Use the 'official' pin mapping (and produce schematic/artwork with the different pinout numbering)
Upgrade the core files to the current version (1.05)
Tweak the pin-change interrupts in the pins_arduino file which are mentioned at..SoftwareSerial problem , but only on 1284p - #3 by skyjumper - Programming Questions - Arduino Forum .I expect to keep to the 'official' pin mapping from here on and to post the updated files in the coming week.
Enjoy....
My latest batch of boards just came back so its soldering time again. This lot has a breakout boards for the RFM12 and RFM70/73 which allows plugging in to the same place a nRF24L01 board would. Same 8-pin footprint.
A tiny 23mm square board for a 32U4 (you gave me the idea for that one from your mention of the funky, http://harizanov.com/wiki/wiki-home/funky-sensor-v2/ ) My variant has a RF board connector so I can use either the RFM12 breakout (above) or the nRF24 one. I've tried the Teensy and Leonardo bootloaders, both work OK. It has a micro-USB connector, a 6-pin programming header and 10 pins broken out. 0805 R/C's so not nice to build.