Hello All,
First im extremely new to Arduino i have only done a couple of small projects that have worked great!
So i bought 2 of the UHF-RW-MP-232-V1 readers with the idea of creating a cattle management program. So ive started this to get help when i cant get things working on my own
So i started by connecting the reader to a Arduino pro mini and after some reading i got it to read card data
Every read is consistent(obviously with one or two miss reads) but my current problem is that the values i read via the pro mini and the values read by the Demo program (on the PC) do not match, example:
Demo reads - 07 . 00 . EE . 00 . 94 . 7B . 00 . BD which is ( 07 00 238 00 148 123 00 189 )
Arduino reads- 7C . 23 . FF . D7 . 9 . FF . 85 . 0 which is (124 35 255 215 9 255 133 0
I have read and tried a lot of different approaches but just cant see how to get the same values from demo program and Arduino.
Here is the code im currently using:
#include <SoftwareSerial.h>
const int SerInToArdu=2; //Defines pin data passes
const int SerOutFrmArdu=3; //Not used, but
SoftwareSerial mySerialPort(SerInToArdu,SerOutFrmArdu);
int myCount =0;
void setup()
{
Serial.begin(9600);//For access to serial monitor channel
Serial.println("Bring an RFID tag near the reader...");
mySerialPort.begin(57600);
pinMode(13, OUTPUT);
};
void loop()
{
int incomingByte(0);
if (mySerialPort.available() > 0) {
  for(int i=0; i < 10; i++)
  {
   Â
incomingByte = mySerialPort.read();
       Serial.print(incomingByte);
      Â
  }
 Â
 };
}
This has been cut down to just show the bare code doing the reading and printing, but im sure its some encoding problem, or something.
Your help is greatly appreciated
Willie