CrossRoads:
Connect the 6 pins from the pocket programmer to either the ICSP header, or to Reset-SCK-MISO-MOSI on the female header and program away.
Nothing needs to be done to the card.Arduino - to - breadboard. Why are you messing with that when you have a nice working AVR ISP? Stay away from that.
Well thanks for everyones help on this Post.
I see your point about not needing to use the Arduino UNO R3 as an ISP since I already have a good working one to use.
I just wanted to see if I can get the Arduino UNO to work as the ISP as well. I tried it with the female header and with the male header and I just cannot not get it to sync no matter what I do.
So the problem was not really with the TInyUSB but rather the Arduino as an ISP. I just confused things by starting out with the TinyUSB when I should have had the Arduino connected up and took a picture of that instead.
Have you ever got it to work with the Arduino?