Thanks For your help!
Here are a couple pictures:
And here is the code:
// RGB_GLCD_Bitmap (C)2010 Henning Karlsen
// web: http://www.henningkarlsen.com/electronics
//
// This program is a demo of the drawBitmap()-function.
//
#include "RGB_GLCD.h"
#include <avr/pgmspace.h>
GLCD myGLCD;
extern unsigned int icon1[0x400];
extern unsigned int icon2[0x400];
extern unsigned int tux[0x1000];
void setup()
{
myGLCD.initLCD();
//myGLCD.clrScr();
myGLCD.fillScr(255,255,255);
//myGLCD.setColor(255,255,255);
myGLCD.print("Hello World Init",CENTER,5,255,255,255);
// Draw a moving sinewave
byte buf[126];
int x, x2;
int y, y2;
int r;
x=1;
for (int i=1; i<3654; i++)
{
x++;
if (x==127)
x=1;
if (i>127)
{
if ((x==63)||(buf[x-1]==63))
myGLCD.setColor(0,0,255);
else
myGLCD.setColor(255,255,255);
myGLCD.drawPixel(x,buf[x-1]);
}
myGLCD.setColor(0,255,255);
y=63+(sin(((i*1.3)*3.14)/180)*50);
myGLCD.drawPixel(x,y);
buf[x-1]=y;
// delay(3);
}
delay(5000);
myGLCD.clrScr();
myGLCD.fillScr(255,255,255);
}
void loop()
{
myGLCD.setColor(0,0,0);
myGLCD.print("Blinking Message", CENTER,5,255,255,255);
myGLCD.print("Line 2 stuff", CENTER,15,255,255,255);
delay(1000);
myGLCD.setColor(255,255,255);
myGLCD.print("Blinking Message", CENTER,5,0,0,0);
myGLCD.setColor(0,0,0);
myGLCD.print("Line 2 stuff", CENTER,15,255,255,255);
delay(1000);
myGLCD.setColor(0,0,0);
myGLCD.print("Blinking Message", CENTER,5,255,255,255);
myGLCD.setColor(255,255,255);
myGLCD.print("Line 2 stuff", CENTER,15,0,0,0);
delay(1000);
}
I have downloaded the graph code and will try and figure out the Large Font stuff.
Thank you again for your help.
Loren