Arduino as a Pic Programmer!

hey soranne can you give me alink for this project(circuit,program)
i need this project for my thesis in school

All the infromation I have is on the first page

Hi!

A good project!
In case interested, I've created an Arduino programmer for PIC32 series. The details are found at Google Code Archive - Long-term storage for Google Code Project Hosting..

Cheers!

Hi Soranne!

I think you save me! Please tell me that I can program a PIC18F452 or a PIC16F88 (with I prefer) using your project.

diogo0880:
Hi Soranne!

I think you save me! Please tell me that I can program a PIC18F452 or a PIC16F88 (with I prefer) using your project.

Hey!
Of course you can! But depending on the protocol they use you may need to adapt a bit the code.

But personnaly I would prefer the beaglebone to the raspberry pi :wink:
The beaglebone looks more like an arduino (you can easily access the inputs/outputs and and shields) and is more powerful than a raspberry pi, even if it's a bit more expensive.

How do i connect the pic16f684? I checked the datasheet and it doesnt have pins labeled as RB4 RB6 AND RB7? :frowning:

Hi all,

Mine is PIC16F887

Im trying to program it using your programmer (the .exe application) and have few question.

How to send the command "s" ? i want to program using low voltage.

and how to wire it? here's what I got from my PIC datasheet.(attached)

hoping someone can give me circuit suggesstion. thanks :slight_smile:

Hint: If you look at post #2 and there is no link to the *.exe file, you have to create a forum account and log in. An advise in post #2 would be nice.

wow seems like I got answer of my unasked question,going to use it in one of my own project:)
thanks for your help!!!

Soranne could you enable the program and a manual to use it because I'm not getting alone!

Hi Soranne,

Any chance you could post the C# code for the application?

Thanks!

Soranne I have been following this project and now I want to program one PIC12F683.
Can it now be programed with your current version of this project?

flyboy_____:
Soranne I have been following this project and now I want to program one PIC12F683.
Can it now be programed with your current version of this project?

Anyone posting here?

Hello, men the programmer works 100%¡¡¡ congratulations, but
the programmer only work with BASIC code, i´m try with
C code copiled with PIC C and dont work.

you see the picture.

sorry for bad inglish, i´m spanish.

Captura.PNG

djsaw1994:
Hello, men the programmer works 100%¡¡¡ congratulations, but
the programmer only work with BASIC code, i´m try with
C code copiled with PIC C and dont work.

you see the picture.

sorry for bad inglish, i´m spanish.

Hey,

That is a weird error, comes from the hex file itself, you should try to convert it to INTEL HEX format if you can.

To all others : I receive a lot of questions, unfortunately I don't have time to support that project anymore, because of my studies. I am really sorry about that. I also have seen that the C# code has disapeared, i will repost it as soon as possible.

Best regards.

please can you make a step by step for me? i don't understand how to use the second code(for COM)

Untitled.png

Hi Soranne, would you please upload again the circuit diagram? The one mentioned in your page at http://img11.hostingpics.net/pics/210379schma.png is no longer available. Thank you.

Hi

I'm trying to download the Program from the second post. But something seems to be wrong with the file. I'm not able to open it. Is it really a zip Archive?

Thanks for helping me out.

The zip in the post is corrupted.
Is there anyone with the original working version willing to upload it somewhere?

cheers

P.s. I did manage to repair the downloaded zip from the second post using some 'diskinternals zip repair' tool (I can start the ArduinoPic.exe, can't test if it is working correctly at the moment). Not sure how to attach anything to this post, but some zip-repair tool might help you too.