Arduino with advancedHMI

Using Arduino Interfacing w/ Software on the Computer
14

GWManning great to hear of your success.
As there seems to be no complete examples or tutorials specifically on how to set this up and especially for a newbee like myself I have a couple of questions as follows which will also help others following this topic:

  1. I've found the site Google Code Archive - Long-term storage for Google Code Project Hosting. and also found slave mode driver code. A related site has the ModBus Master as well.
    My question is to get Arduino working with AdvanceHMI should I set up the Arduino as a ModBus Slave which will then be connected to the PC serial bus (e.g. Com1) even through a USB/232 adapter?

  2. If so then do I then download the Slave Driver and copy the downloaded Modbus folder into the Arduino\libraries folder.

  3. Could you upload an example for all to see or even do a YouTube tutorial. Hope I'm not asking too much as I'm sure there is others like myself who would like the guidance.

Thanks in antisipation