Can anyone see why my code would not be working?
#include <SoftwareSerial.h>
#define ledPinB 13
// constants won't change. They're used here to
// set pin numbers:
const int buttonPin = 2; // the number of the pushbutton pin
const int ledPin = 12; // the number of the LED pin
// variables will change:
int buttonState = 0; // variable for reading the pushbutton status
void setup() {
// initialize the LED pin as an output:
pinMode(ledPin, OUTPUT);
pinMode(ledPinB, OUTPUT);
pinMode(buttonPin, INPUT);
Serial.begin(9600);
}
void loop(){
// read the state of the pushbutton value:
buttonState = digitalRead(buttonPin);
// check if the pushbutton is pressed.
// if it is, the buttonState is HIGH:
if (buttonState == HIGH) {
// turn LED on:
digitalWrite(ledPin, HIGH);
Serial.print("VPF test.mp3");
Serial.print(13,BYTE);
delay(5000); //wait five seconds
Serial.print("VST"); //stop playing
Serial.print(13,BYTE);
}
else {
// turn LED off:
digitalWrite(ledPin, LOW);
}
}