Go Down

Topic: Arduino and NRF24L01 (Read 143 times) previous topic - next topic

Calfarera

I'm sorry I have a question about programming Arduino with NrF24L01 module, I want send a data from sensors Pressure Gauge and Infrared, I want to send the data that been received and transfer it from transmitter to receiver (both are NRF24L01 module) and from the receiver the data will disolayed on LCD, the data that will be disay is Height and Weight, thank you

sherzaad

I'm sorry I have a question about programming Arduino with NrF24L01 module, I want send a data from sensors Pressure Gauge and Infrared, I want to send the data that been received and transfer it from transmitter to receiver (both are NRF24L01 module) and from the receiver the data will disolayed on LCD, the data that will be disay is Height and Weight, thank you
and your question is...?

groundFungus


Calfarera

How to write the program ? And I use the level shifter beetween Arduino Nano and NRF24L01

Robin2

How to write the program ?
The programs are in the link that @groundFungus gave you.

Quote
And I use the level shifter beetween Arduino Nano and NRF24L01
The nRF24 must not have more than 3.6v on its Vcc pin but it can work with 5v on the other pins so no level-shifter is required.

...R
Two or three hours spent thinking and reading documentation solves most programming problems.

Go Up