Go Down

Topic: JDY-10 BLE BLUETOOTH MODULE 4.0  (Read 742 times) previous topic - next topic

Luisk87

Feb 17, 2017, 12:45 pm Last Edit: Feb 17, 2017, 01:32 pm by Luisk87
Hi?? Samebody have the JDY-10 BLE BLUETOOTH 4.0 Datasheet and PINMAP? I Need localize the PIN RESET here to modify firmware



raptor

#1
Jun 16, 2017, 01:50 pm Last Edit: Jun 16, 2017, 02:08 pm by raptor
I hope this helps. I have yet to work with them if you find any good example codes send them my way lol :p

This is the best I can get, I believe that the JDY-10 is very similar to the HM-10 cc2541.

ftp://imall.iteadstudio.com/Modules/IM130614001_Serial_Port_BLE_Module_Master_Slave_HM-10/DS_IM130614001_Serial_Port_BLE_Module_Master_Slave_HM-10.pdf

I was going to upload a picture but it;s saying it's too big.

on mine the reset is pin #1.
for example if the bottom edge with all the pins is towards your body start from the top and go in a anti-clockwise motion for pin 1, 2, etc. I wish the picture had loaded. :smiley-confuse:

Luca12

Hi Raptor, I'm currently working with this module, did you find out the purpose of pins 1-16? I'm interested to share information on the jdy-10, I'm only able to to use it as a slave.

Go Up