Go Down

Topic: Data Logger RTC by Deek Robot (Read 2286 times) previous topic - next topic

mathnut88

Jan 04, 2017, 11:14 pm Last Edit: Jan 04, 2017, 11:33 pm by mathnut88
I just bought one of the Deek robot RTC data logger shields.

It is NOT pin compatible with Arduino or Digispark , but it is labeled so it can be used.

For those searching for documentation and libraries needed for the use of the logger I have available the support documentation sent to me by the maker in China. I have installed the libraries and looked at the schematic for the board and all looks good but I have not used it yet. Use at your own discretion and risk.

A note. They use CS (card select) instead of SS (Slave Select) to label the select pin. The two mean the same.

vroemm


I can not extract the file.
These errors are shown:

$> unzip RTC\ logger\ library.zip
Archive:  RTC logger library.zip
  End-of-central-directory signature not found.  Either this file is not
  a zipfile, or it constitutes one disk of a multi-part archive.  In the
  latter case the central directory and zipfile comment will be found on
  the last disk(s) of this archive.
unzip:  cannot find zipfile directory in one of RTC logger library.zip or
        RTC logger library.zip.zip, and cannot find RTC logger library.zip.ZIP, period

gunamoi1

I had the same problem trying to open the zip file with winzip.
But it opened okay with 7zip!

To get winzip to open it, rename the file from ".zip" to ".rar"


Piccolo

Did anyone get this working with the UNO?
I just bought one of these but cant find any working examples, diagrams etc even though it was advertised as comes with tutorials :(
I am new to Arduino however I'm trying to monitor several contact closures that close at a set time every day.
I was thinking of a graphical display on a 5110 lcd and a missed event alarm if one of the contacts doesn't close at the specified time.
Any help with this project would be greatly appreciated :)

Thankyou,
Piccolo.

Carlo61

I'm also searching for connecting deek robot 8122 Data Logger for Arduino Uno (wiring, examples)

Can anybody assist ?

encrone_90

Excuse me, I have a question
someone knows how much this module consumes in mAh?
is the same derek-robot  data loggin board

IgnasD

If any of You still interested. I followed this video. And mine works. I combined several examples and it works with LCD and BT together.

https://www.youtube.com/watch?time_continue=161&v=sS_oW81NweI

c1000mg

can you tel me what battery do i need for this module?

pignon

You will need a 3V CR1220 (lithium) battery.

Go Up