Go Down

Topic: AutoHome - Internet of Things(IoT) for Home Automation (Read 99 times) previous topic - next topic

Geekie12

Hello All,

I am glad to share my IoT project - AutoHome : IoT for Home Automation.

AutoHome turns your mobile into a location-agnostic real-time Home Appliance remote, anywhere,
anytime! The Home Appliance can be controlled not just within home, but from anywhere, as long
as the devices are network-reachable.

Demo : AutoHome - Internet of Things(IoT) for Home Automation - Arduino version

This demo shows the Arduino version of AutoHome wherein the Lasko Room Heater is controlled
by using my Android Smartphone running my LaskoHeaterRemote app as per the below key combinations :

_____________________________________________________________

Lasko Room Heater Button    ::                          Android Keys             
_____________________________________________________________

Power On/Off                                 Power + Volume Up + Volume Down
Plus                                                   Volume Up
Minus                                                Volume Down
Oscillate                                           Power + Volume Up
High/Low                                         Power + Volume Down
Timer                                                Volume Up + Volume Down
_____________________________________________________________


The demo contains the below segments :

1. What is AutoHome?
2. What can AutoHome do?
3. How does AutoHome all of that?
4. AutoHome overview
5. Arduino - AutoHome - Circuit
6. AutoHome - Introduction / Bridge
7. AutoHome - Demo / Bridge
8. AutoHome - Non-line-of-sight(NLOS) demo / Bridge
9. AutoHome - Auto-reset recovery / Bridge
10. AutoHome - Introduction / Serial
11. AutoHome - Demo / Serial
12. AutoHome - Non-line-of-sight(NLOS) demo / Serial
13. AutoHome - Auto-reset recovery / Serial
14. AutoHome - Platform
15. AutoHome - Bringup / Bridge
16. AutoHome - Android & Arduino / Bridge
17. AutoHome - AVR MCU code - Build and Upload automation / Bridge
18. AutoHome - Bringup / Serial
19. AutoHome - Android & Arduino / Serial
20. AutoHome - AVR MCU code - Build and Upload automation / Serial
21. AutoHome - Challenges overcome - Arduino version
22. AutoHome - Timeline
23. AutoHome - Statistics
24. AutoHome - Scope

AutoHome - Arduino version includes below components :
1. Arduino Yún
2. Infrared transmitter
3. Jumper wires
4. LCD (I2C)
5. Android Smartphone
6. Infrared-controlled Home Appliance - Lasko Room Heater

There is a Raspberry Pi version of this project as well. Here is the link for the same.
AutoHome - Internet of Things(IoT) for Home Automation - Raspberry Pi version

The demo contains the below segments :

1. What is AutoHome?
2. What can AutoHome do?
3. How does AutoHome all of that?
4. AutoHome overview
5. Raspberry Pi - AutoHome - Circuit
6. AutoHome - Introduction
7. AutoHome - Demo
8. AutoHome - Non-line-of-sight(NLOS) demo
9. AutoHome - Platform
10. AutoHome - Bringup
11. AutoHome - Android & Raspberry Pi
12. AutoHome - Challenges overcome - Raspberry Pi version
13. AutoHome - Timeline
14. AutoHome - Statistics
15. AutoHome - Scope

AutoHome - Raspberry Pi version includes below components :
1. Raspberry Pi 3 Model B v1.2
2. GPIO extension board
3. Breadboard
4. Jumper wires
5. Infrared transmitter
6. LCD (I2C)
7. Android Smartphone
8. Infrared-controlled Home Appliance - Lasko Room Heater

Cheers!



Go Up