Go Down

Topic: web temp with enc28j60. Questions with programming (Read 983 times) previous topic - next topic


Hi guys, I'm new here and realy poor in programming. I have a shield (enc28j60) and want to use it as a simple web temperature notifier using the web temperature code. I need to modify it with a over temp value and a lower temp value. Both give send me a email when temp is too low or too hight.

Exemple :
if temp is over 20 deg, send an email
If temp is under 15 deg, send an email

It's the only thing i need, can you some one help me with this problem?

Thanks a lot

Go Up