Go Down

Topic: Welcome ArduinoDroid - Arduino IDE for Android (Read 32034 times) previous topic - next topic


Hi everyone!

I need help to develop and android app that is capable to upload a new firmware (.hex) to an arduino board, via bluetooth.

The idea behind this app is to be able to replace an arduino firmware that contains problems (bugs) with a fixed one, that was previously downloaded on a mobile device with android.

Would anyone please help me?

Thank you guys!


I used ArduinoDroid on MXQ (Android TV BOX)  with no big problems.
The Android on MXQ is 4.4.2 so I used an older version version of ArduinoDroid (sob).

Using it I developped  an app  to control Arduino UNO board via USB from PHP (USPphpTunnel)
see it here https://github.com/msillano/USBphpTunnel

About Arduino console terminal: the only terminal app that worked with my Arduino board is
"Serial USB terminal" https://play.google.com/store/apps/details?id=de.kai_morich.serial_usb_terminal.



Does not reliably see/recognize genuine Arduino Uno under Nougat (7.1.2) Occasionally, the ArduinoDroid sees the Uno, and I can compile an unmodified blink and send it to the Uno.  It compiles and appears to download and sends messages that it was received.  Change the code by only a single digit (changing the delay from 1000 to 100, or 1 second to 0.1 second) also compiles and downloads, and gives no errors at all.  Everything APPEARS to work well, except the LED 13 continues with a flash of 1 second on, 1 second off.  Obviously, with Nougat, it fails to actually update the Uno.  I am using a Google Nexus 5x with Android 7.1.2 and a Genuine Arduino Uno.  Software author has been unresponsive so far, likely aware that Nougat is a problem.


Apr 19, 2017, 10:12 pm Last Edit: Apr 19, 2017, 10:14 pm by Ballscrewbob
Does anyone have the current app link for this (not blog) as the one in the initial post seems dead.


THIS is the current link
It may not be the answer you were looking for but its the one I am giving based on either experience, educated guess, google or the fact that you gave nothing to go with in the first place so I used my wonky crystal ball.


Hi, Arduino Droid is a great software, but I'm finding trouble uploading codes to my Arduino Uno. Sometimes it works just fine, but most of the times, the following error occurs =>

Uploading error

avrdude done. Thank you.

Error: Process returned not 0 result code: 1

How can I solve this problem.

Go Up