Go Down

Topic: Arduino Yun 192.168.240.1 / YUNNAME.local / port not shown on Arduino IDE (Read 408 times) previous topic - next topic

baymax

Hi

At home, Yun does connect to the home wifi, but it cant be accessed by any of the above methods. - the browser says - The server at 192.168.240.1 is taking too long to respond.

Also, the following is received on serial terminal:

[ 2224.390000] wlan0: authenticate with 10:be:f5:7d:38:78
[ 2224.400000] wlan0: send auth to 10:be:f5:7d:38:78 (try 1/3)
[ 2225.010000] wlan0: send auth to 10:be:f5:7d:38:78 (try 2/3)
[ 2225.400000] wlan0: authenticated
[ 2225.420000] wlan0: associate with 10:be:f5:7d:38:78 (try 1/3)
[ 2226.010000] wlan0: associate with 10:be:f5:7d:38:78 (try 2/3)
[ 2227.010000] wlan0: associate with 10:be:f5:7d:38:78 (try 3/3)
[ 2227.410000] wlan0: RX AssocResp from 10:be:f5:7d:38:78 (capab=0x411 status=0 aid=5)
[ 2227.410000] wlan0: associated


My Yun has no problems to show up on the same laptop using my office wifi - luci interface opens and Yun's IP is also shown on the ports list on the Arduino IDE. Everything works fine.

Ive added a DHCP reservation on the router and making an exception on the firewall for using UDP and at port 5353.

i want it to work on my home network too. Please help. Thanks!

ballscrewbob

Have you checked the DHCP in your home network to see if it was assigned a dynamic IP ?

Also if you set the YUN to a static IP "outside" of your home network subnet you probably won be able to see it and the YUN probably wont be able to connect.
It may not be the answer you were looking for but its the one I am giving based on either experience, educated guess, google or the fact that you gave nothing to go with in the first place so I used my wonky crystal ball.

baymax

Thanks @ballscrewbob
I couldnt try yesterday.
It works by setting the last numbers of the ip address less than 100, for eg. 192.168.0.35
and thats what makes it static (as on a forum).

ballscrewbob

SO is it all good now ?
No issues ?

Unless you really need a static IP for a particular reason then dynamic is usually a better option.

It may not be the answer you were looking for but its the one I am giving based on either experience, educated guess, google or the fact that you gave nothing to go with in the first place so I used my wonky crystal ball.

baymax

Hi,
Yes its solved. Thanks.
My yun doesnt work as a server on a dynamic ip (ie for YUNNAME.local to open on the browser).

Go Up