Not the Arduino but a custom Wiring board

So here is a youtube video of my own wiring mini clone but I've added a couple things.

  1. Fully compatible with wiring
  2. On board USB
  3. Standard breadboard layout (Leave a row on each side open of
    breadboard)
  4. Fully regulated power supply (6 to 15V)
  5. Dedicated VCC and GND pins.
  6. Power, TX, RX, and Pin 48 LEDs
  7. 1"x3.1" (Small)
  8. ISP header

Link: Nano Plexus, Wiring Board Clone - YouTube
:slight_smile: