Go Down

Topic: Controlling the speed of a DC motor (Read 1 time) previous topic - next topic

JimboZA

When  you say 1 rev / half hour, do you mean continuously spinning* but very slowly, or could it work if it was stationary for 29m 59s and then did a single turn to do what ever it's supposed to achieve?

(* if such a speed could be described as "spinning")

As MarkT points out, if you explain the actual problem, not the problem with your solution, you'll probably get better help.


Johannesburg hams call me: ZS6JMB on Highveld rep 145.7875 (-600 & 88.5 tone)
Dr Perry Cox: "Help me to help you, help me to help you...."
Your answer may already be here: https://forum.arduino.cc/index.php?topic=384198.0

raschemmel

1 rev/0.5 hours = 2 revs /per hour = 0.033 rpm

This would have to be a geared motor.

Arduino UNOs, Pro-Minis, ATMega328, ATtiny85, LCDs, MCP4162, keypads,<br />DS18B20s,74c922,nRF24L01, RS232, SD card, RC fixed wing, quadcopter

Go Up