AutoHome - Internet of Things(IoT) for Home Automation

Community Exhibition / Gallery
1

Hello All,

I am glad to share my IoT project - AutoHome : IoT for Home Automation.

AutoHome turns your mobile into a location-agnostic real-time Home Appliance remote, anywhere,
anytime! The Home Appliance can be controlled not just within home, but from anywhere, as long
as the devices are network-reachable.

Demo : AutoHome - Internet of Things(IoT) for Home Automation - Arduino version

This demo shows the Arduino version of AutoHome wherein the Lasko Room Heater is controlled
by using my Android Smartphone running my LaskoHeaterRemote app as per the below key combinations :

Lasko Room Heater Button :: Android Keys

Power On/Off Power + Volume Up + Volume Down
Plus Volume Up
Minus Volume Down
Oscillate Power + Volume Up
High/Low Power + Volume Down
Timer Volume Up + Volume Down

The demo contains the below segments :

  1. What is AutoHome?
  2. What can AutoHome do?
  3. How does AutoHome all of that?
  4. AutoHome overview
  5. Arduino - AutoHome - Circuit
  6. AutoHome - Introduction / Bridge
  7. AutoHome - Demo / Bridge
  8. AutoHome - Non-line-of-sight(NLOS) demo / Bridge
  9. AutoHome - Auto-reset recovery / Bridge
  10. AutoHome - Introduction / Serial
  11. AutoHome - Demo / Serial
  12. AutoHome - Non-line-of-sight(NLOS) demo / Serial
  13. AutoHome - Auto-reset recovery / Serial
  14. AutoHome - Platform
  15. AutoHome - Bringup / Bridge
  16. AutoHome - Android & Arduino / Bridge
  17. AutoHome - AVR MCU code - Build and Upload automation / Bridge
  18. AutoHome - Bringup / Serial
  19. AutoHome - Android & Arduino / Serial
  20. AutoHome - AVR MCU code - Build and Upload automation / Serial
  21. AutoHome - Challenges overcome - Arduino version
  22. AutoHome - Timeline
  23. AutoHome - Statistics
  24. AutoHome - Scope

AutoHome - Arduino version includes below components :

  1. Arduino Yún
  2. Infrared transmitter
  3. Jumper wires
  4. LCD (I2C)
  5. Android Smartphone
  6. Infrared-controlled Home Appliance - Lasko Room Heater

There is a Raspberry Pi version of this project as well. Here is the link for the same.
AutoHome - Internet of Things(IoT) for Home Automation - Raspberry Pi version

The demo contains the below segments :

  1. What is AutoHome?
  2. What can AutoHome do?
  3. How does AutoHome all of that?
  4. AutoHome overview
  5. Raspberry Pi - AutoHome - Circuit
  6. AutoHome - Introduction
  7. AutoHome - Demo
  8. AutoHome - Non-line-of-sight(NLOS) demo
  9. AutoHome - Platform
  10. AutoHome - Bringup
  11. AutoHome - Android & Raspberry Pi
  12. AutoHome - Challenges overcome - Raspberry Pi version
  13. AutoHome - Timeline
  14. AutoHome - Statistics
  15. AutoHome - Scope

AutoHome - Raspberry Pi version includes below components :

  1. Raspberry Pi 3 Model B v1.2
  2. GPIO extension board
  3. Breadboard
  4. Jumper wires
  5. Infrared transmitter
  6. LCD (I2C)
  7. Android Smartphone
  8. Infrared-controlled Home Appliance - Lasko Room Heater

Cheers!