Go Down

Topic: urgent problem with arduino uno R3 => green led low and problem uploading (Read 63 times) previous topic - next topic

zoilgust

Dear all,

I'm totally disapointed with my arduino uno R3  :(

I'm working on a 2dof seat with a programm already tested and works fine

yesterday it was fine ... and today it's not working, green led is down light, and impossible to reset or to upload the card.

could you help me ?
I need, for a demonstration, to have the card working for tonight ...  :smiley-confuse:  :smiley-confuse:

here is error message

thx !



Arduino : 1.6.5 (Windows 8.1), Carte : "Arduino Duemilanove or Diecimila, ATmega328"

Les options de compilation ont été modifiées, tout sera recompilé



Le croquis utilise 774 octets (2%) de l'espace de stockage de programmes. Le maximum est de 30 720 octets.

Les variables globales utilisent 9 octets (0%) de mémoire dynamique, ce qui laisse 2 039 octets pour les variables locales. Le maximum est de 2 048 octets.

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x1a

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x1a

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x1a

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x1a

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x1a

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x1a

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x1a

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x1a

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x1a

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x1a

Problème de téléversement vers la carte. Voir http://www.arduino.cc/en/Guide/Troubleshooting#upload pour suggestions.

  Ce rapport contiendrait plus d'informations si l'option
  "Montrer les informations de sortie pendant la compilation"
  était activée dans Fichier > Préférences.

Go Up