Go Down

Topic: error: expected constructor, destructor on compile (Read 5709 times) previous topic - next topic

kin37ik


Disable all real-time anti-virus processes.
.
I do not have any kind of anti virus on my computer

pYro_65

I compiled those 4 files without error after changing wprogram.h to arduino.h
Did you have gcc previously installed or is arduino using the copy it had in the download?

I would recommend removing all versions of arduino IDE ( and driver installs ) and start fresh with 1.0
Forum Mod anyone?
https://arduino.land/Moduino/

kin37ik


I compiled those 4 files without error after changing wprogram.h to arduino.h
Did you have gcc previously installed or is arduino using the copy it had in the download?

I would recommend removing all versions of arduino IDE ( and driver installs ) and start fresh with 1.0

ive never had a previous installation of GCC, so id say id be using the one that came with the IDE, i did copy my libraries to the arduino 1.0 folder when i tried first time around, the only sketch i got to work was an old rainbowduino 1.05 but i have no idea how to use that firmware, ill try a fresh slate and see how that goes and report back.

kin37ik

#18
May 14, 2012, 04:45 pm Last Edit: May 14, 2012, 05:02 pm by kin37ik Reason: 1
just tried a cleanslate on arduino 1.0, re-installed the UNO driver and all, opened the latest MTXcontrol firmware sketch, ammended the headers, and got thrown a massive pile of errors.

though an older version of the mtxcontrol firmware compiled fine, but, the only problem is the software on my PC to control it will not interact with it because it's using older firmware, so i need to figure out how to fix the latest firmware

nickgammon

On Arduino 1.0, after making the changes I mentioned about the header files, I get this:

Code: [Select]
Binary sketch size: 3768 bytes (of a 32256 byte maximum)
Please post technical questions on the forum, not by personal message. Thanks!

More info: http://www.gammon.com.au/electronics

nickgammon


ammended the headers, and got thrown a massive pile of errors.


Can't help if you don't show the errors.
Please post technical questions on the forum, not by personal message. Thanks!

More info: http://www.gammon.com.au/electronics

kin37ik

after some much needed sleep, i fixed the compile error, for some reason it was attempting to reference the sketch file twice despite having one copy opened.

while i test this, i have another rainbowduino sitting here with another arduino, and i need to figure out how to replay commands to it, though i havent found much if any documentation on getting it to output something, is there somewhere that may have such documentation?

Go Up