CrossRoads:
I'm seeing pins connected together here.
Can you confirm with the art work if these are connected?MATRIX1 16 8 8 1
IC1 2 DIG0 1
MATRIX13 1 8 8 1
IC1 21 SEGE 1
I am not totally clear what this means. I can confirm (on the printed board with a meter as well as looking at the board file in eagle) that IC1 pin 2 connects to pin 8 on the correct jumper to it's in the right spot for my matrix. IC1 pin 21 connects to pin 8 on the other jumper, directly across the board from the first one, again correct for my matrix. And pin's 2 and 21 are not connected to each other.
Edit: I understand now what you were saying that it's the same pin number on the jumper/header row so they'd be connected together. It's a different header on the board and the right pin on the IC does go to the right header and they're not connected together. I don't know why the netlist looks like that, is it the first column (1 vs 16) that defines them as separate devices?