To implement in the future, this are the modes of Xboard Firmware:
Programmable Rate Of Fire-
1 to 30
Programmable Burst-mode-
2 to 8
Safe Burst mode –
Pulling the trigger three times in less than one second results in an X-shot burst on the third trigger pull. Each pull of the trigger in less than one second after this, results in another X-shot burst (X= 2 to 8 ).
Safe Full-Auto mode-
Pulling the trigger three times in less than one second results in full-automatic firing. Holding the trigger down on the third pull sustains this full-auto mode.
Auto-Response mode –
The marker fires on the pull and on the release of the trigger.
Turbo-mode –
Pulling the trigger three times in less than one seconds results in full-automatic firing at rate of 15 BPS. To sustain this rate of fire the trigger must be pulled at least once a second.
Semi-Auto –
This mode is the same as selecting the F firing mode with the selector switch (one pull/release of the trigger fires one time).
Burst mode –
The marker fires an X-shot burst on each trigger pull (X= 2 to 8 ).
Full-Auto mode –
Pulling the trigger results in full-automatic firing. Holding the trigger down on the first pull sustains this full-auto mode.
X mode –
Pulling the trigger results in full-automatic firing. Holding the trigger down on the first pull sustains this full-auto mode. The Rate of fire (ROF) will gradually increase depending on how long the trigger is held (10 to 25bps).
Super Response mode – aka A.D.A.M. mode
The marker fires an X-shot burst on each trigger pull and on the release of the trigger (X= 2 to 8 ).
===========================================
The follow feature is suggested by me:
Abbility to Change RATE OF FIRE (betwen 2 rates, 15 and 25 for example) directly by pressing program button