Go Down

Topic: stk500_program_enable(): protocol error, expect=0x14, resp=0x50 (Read 5111 times) previous topic - next topic


Hello everyone,

I am being desperate with programing atmega32l from arduino uno. I am trying to upload Blink program through arduino as ISP programer.
I uploaded ArduinoISP program to the board and then I connected standalone atmegas32L(internal clocks) to ICSP on arduino pins 10-13.
I compiled Blink example program to hex file (shift+verify button) and to the cmd I wrote this: avrdude -P com3 -b 19200 -c avrisp -p m32 -v -e -U flash:w:Blink.cpp.hex
Also Blink.hex I tried, but "stk500_program_enable(): protocol error, expect=0x14, resp=0x50" error massage is always showed.

I have upload a photo of my breadboard here: http://imageshack.us/photo/my-images/687/p1010978h.jpg/
and print screen of my monitors here: http://imageshack.us/photo/my-images/10/arduinog.jpg/

Any help will be appreciate.


have you followed this tutorial http://arduino.cc/forum/index.php?topic=52223.0 ?


Thank you putyn, I have looked at it a have done points 1-7, but when I am trying to type avrdude -p m32 -c avrisp -P com3 -b 19200 in command promt in arduino-0022hardware\tools\avr\bin\ folder, an error message C:\WinAVR-20100110\bin\arvdude.conf:320 unrecognized character: "a" is appeared.

Go Up