It still doesn't work. That's what I see, when I have enabled upload.verbose in Arduino preferences file.
Binary sketch size: 896 bytes (of a 14336 byte maximum)
hardware/tools/avr/bin/avrdude -Chardware/tools/avr/etc/avrdude.conf -v -v -v -v -pm168 -cstk500v1 -P/dev/tty.usbserial-A80083bt -b19200 -D -Uflash:w:/Users/ernis/Desktop/arduino-0016/examples/Digital/Blink/applet/Blink.hex:i
avrdude: Version 5.4-arduino, compiled on Oct 9 2007 at 11:20:31
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
System wide configuration file is "hardware/tools/avr/etc/avrdude.conf"
User configuration file is "/Users/ernis/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/tty.usbserial-A80083bt
Using Programmer : stk500v1
Overriding Baud Rate : 19200
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: Send: Q [51] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding