Hello, Besides an raduino board I have a 3v 600mA power source and a 3v 350mA high power LED. I plan to run the led at 2.5v only and 200mA using PWM. Not sure if 2n2222a is okay to drive the LED, would it run hot? From what I have read I can't use any MOSFET i.e. IRF510 or 2n7000 due insufficient …

PWM 3V 200mA High Power Led from 3v soure

mjkzz March 19, 2013, 2:51pm 11

Sorry, read the wrong data sheet ... but take a look at MOSFET FDS6690A datasheet, Fig 1 and Fig 2. It is a SOIC 8 package, however.

Topic		Replies	Views
Quick question about led drivers in general LEDs and Multiplexing	7	2256	May 6, 2021
Power LED Dimming? Project Guidance	1	1227	May 5, 2021
High current LED's LEDs and Multiplexing	4	1472	May 6, 2021
PWM driving of high-power LED with an arduino LEDs and Multiplexing	9	5953	May 6, 2021
Driving high power LED LEDs and Multiplexing	4	1949	May 6, 2021