[quote author=Nick Gammon link=topic=134097.msg1009527#msg1009527 date=1353879520]
You shouldn't need a crystal, by the way.
Just as a heads-up, I think those chips are usually shipped to run off the internal 8 MHz oscillator, with the "divide clock by 8" fuse set. My programmer should work OK, I've used it with other "fresh" chips, but you might find you need to alter the fuse to get it up to full speed (once you have the bootloader on it). If you don't, it will be running at the wrong baud rate and the bootloader will appear not to be working.
[/quote]this is all i get, then hit reset
Atmega chip programmer.
Written by Nick Gammon.Atmega chip programmer.
Written by Nick Gammon.