Hi there,
I'm almost sure Firmdata can only work on USB serial but I have to ask anyway: is there a possibility to make it work on virtual Serial1 (pin 0,1), for example on Leonardo or Micro?
Thanks, Eric
Hi there,
I'm almost sure Firmdata can only work on USB serial but I have to ask anyway: is there a possibility to make it work on virtual Serial1 (pin 0,1), for example on Leonardo or Micro?
Thanks, Eric
What do you have connected to pins 0 and 1? The PC is generally on the other end of the USB cable/Serial port.
The goal is not to use a USB port, but one of the PC's serial port. As Pin 0 and 1 have TTL levels, it would require an RS232 voltage driver, of course.
The goal is not to use a USB port, but one of the PC's serial port.
Got a golden oldie, eh?
As Pin 0 and 1 have TTL levels, it would require an RS232 voltage driver, of course.
Of course.
An oldie, nah! (well, mine is)
Yet, plain old serial works all the time, and it doesn't require a special driver, and the cable is cheap.
Note that the Arduino will be inside the computer. No DB9 connectors needed, just 3 wires.
If what we plan was an external device to be plugged/unplugged then I'd choose USB.
Eric