Workshop in Zaragoza Feb20-24/2007

[english version follows]

PRIMER TALLER ARDUINO EN ZARAGOZA! --> Intervenciones Electronicas
2007 Febrero 20-24

Como actividad de lanzamiento del nuevo Centro de Arte y Tecnologia (CArT) de Zaragoza vamos a organizar un taller dedicado a la introduccion de aparatos electronicos en el espacio publico. Las actividades consistiran en:

  • introduccion al hardware libre
  • taller basico Arduino
  • acciones e intervenciones electronicas en la ciudad
  • exposicion de resultados

El taller se desarrollara en el hacklab de Hispalinux/ZGZWL en C/San Blas, 104 entre las 18:00 y las 21:30 en dias laborables y el sabado desde las 10:30 y hasta las 14:30. La exposicion se inaugurara el sabado por la tarde en un lugar por determinar.

La inscripcion se abrira a mitades de enero, para mas preguntas queda abierto este foro.

Patrocinado por la Fundacion Zaragoza Ciudad del Conocimiento (http://fundacionzcc.org).


FIRST ARDUINO WORKSHOP IN ZARAGOZA! --> Electronic Interventions
2007 February 20-24

As a way to launch the new Center of Art and Technology (CArT) in Zaragoza we will organize a workshop dedicated to the introduction of electronic devices in the public space. The activites will consist of:

  • introduction to open hardware
  • basic Arduino workshop
  • electronic actions and interventions in the city
  • exhibition of the results

The workshop will take place at Hispalinux/ZGZWL hacklab at C/San Blas, 104 between 18:00 and 21:30 during weekdays, and Saturday between 10:30 and 14:30. The exhibition will open on Saturday afternoon at a location yet to be determined.

Registration procedure will start middle January, post to this forum for further questions.

This workshop will be sponsored by the foundation Fundacion Zaragoza Ciudad del Conocimiento (http://fundacionzcc.org).

hello,

i am an architecture student from the technical university from Graz, Austria and
i am interested in your arduino workshop in february 2007 - is there a way
i can participate and if yes - how much would it cost - is there a place where i can
sleep on campus or a hotel you can recommand.

i am working with arduino already over 6 months or so and i am about to finish
some arduino projects this january hopefully

another question - the course will be in spanish or english ( i only can order beer in spanish :slight_smile: )

thanks in advance for the info

greetz and happy new year from austria

georg kettele

Hej,

the workshop will be financed by the foundation "Fundacion Zaragoza Ciudad del Conocimiento", what means that the only cost for you will be the materials (that you probably already have).

THE WORKSHOP IS FREE OF CHARGE!

About accommodation in Zaragoza, I think you should just wait for one week when the people at the foundation start to gather applications to the workshop. You could ask them because I don't know much about it.

However, Zaragoza is fairly cheap in every sense. Any hostal will be having quite good quality.

Hasta pronto,

/David

hello

please just let me know where i can sign up or subscribe to a newsletter to get all the infos!

i just checked for flights and i am not bookiing anything unless i have a confirmation that i am
in the workshop...

thanks

georg*pixelcrash

Hola David,
señalar que dos personas de Huesca, Diego Casasnovas y Rubén Mur, estamos especialmente interesados en poder asistir al workshop de arduino. Ya recibimos una pequeña introducción en el último Hackmeeting celebrado en Mataró pero necesitamos seguir aprendiendo nuevas cosas. Tengo algunas dudas acerca de si nuestro perfil de neófitos en la materia encaja en vuestra propuesta, acerca del material a llevar (hemos tenido y seguimos serias dificultades para adquirir arduinos en el distribuidor de Madrid) y dónde, cómo y cúando se formalizará la inscripción.

Supongo que seguirás aportando nuevos datos en el foro.

Mil gracias por traer a esta tierra proyectos tan interesantes como gohan.

hola, después de haber asistido a tu conferencia en zaragoza, teníamos ganas de poder asistir a un taller de arduino, así que somos dos y nos apuntaremos.

Hola David (todavía te puedo llamar Kuarty?) :wink:

Varias cosas, en cuanto se sepan los horarios, colgadlos rápido, para que los trabajadores podamos ver si nos da tiempo a organizarnos.

[offtopic]Te adjunto un enlace de un kit de prototipado rápido open-source que acabo de encontrar, igual le sirve a alguien FabatHome - 3D Printers, smart appliances and technology for your home
No he sabido encontrar en vuestro foro si ya sabíais algo. [/offtopic]

Por cierto, la mascletá de Valencia habrá que verla!

Hola Bambino,

el horario para el taller es de tardes. Lo pone en el primer post:

El taller se desarrollara en el hacklab de Hispalinux/ZGZWL en C/San Blas, 104 entre las 18:00 y las 21:30 en dias laborables y el sabado desde las 10:30 y hasta las 14:30. La exposicion se inaugurara el sabado por la tarde en un lugar por determinar.

Como el hacklab de San Blas se puede tener abierto hasta que queramos, si las 18:00 es demasiado pronto para empezar, podemos ponernos de acuerdo y empezar mas tarde.

Un abrazo,

/David

Perdona, ya no se ni lo que leo.

hola!

estudio diseño industrial en la academia de amberes, me gustaria mucho asistir al curso. Estare en españa por estas fechas. Creo que me puedo pasar por zaragoza el viernes y el sabado (23-24) para hacer el curso, ver la exposicion y disfrutar de la fiesta por alli :).
cuando y como me puedo apuntar? me da un poco de miedo que tardo mucho en inscribirme... me puedo apuntar ya?

gracias por el initiativo!
saludos de belgica

boris

Hola,

ya esta disponible el formulario de asistencia al taller de Zaragoza, lo podeis descargar en:

www.gohan.cc

Un saludo,

/David