Go Down

Topic: late into Arduino! (Read 386 times) previous topic - next topic

3D8192

I began working with AVR's as a hobby about 2008, before that it was all computers.   In 2011 I accidentally stumbled across the Parallax Propeller P8X32A and began using it as well, it being the second MCU that I did play in, then the world between worlds came to light with the release of the Raspberry Pi in 2012, as much MCU board as SBC, both computer and MCU, and I continue to play with all three, and they are all great setups.

Though had I found Arduino before finding the P8X32A I would likely have settled in to Arduino, with a little raw AVR on the side and still probably added the Raspberry Pi.   Though the Arduino would likely have been my primary board for MCU applications for a long time had I looked into it sooner.

The Arduino HW simplifies life a lot, and the software is so well thought out, the two together make developing new applications (HW + SW) very simple.

So I am glad to get into the Arduino.

travis_farmer

Welcome to the Arduino world! i hope you find as much enjoyment with the many possibilities as we all have.
:D

~Travis
Current Obsession: My server rack cooler, and my CNC Router
Check out my website, i have my own under-used forum on my hobby server.

3D8192

Welcome to the Arduino world! i hope you find as much enjoyment with the many possibilities as we all have.
:D

~Travis
Thank you.  I believe that the Arduino will be of heavy use to me for a long time to come, it is the best of the MCU boards thus far.

I have been doing something new with the Arduino every single day since I got my first Mega2560 board last month, something that I can not say of any of the others.

As to possibilities, I would not say many though rather infinite, as with any MCU board, though easier and quicker with the Arduino.

Go Up