Need some's help Thanks
in the code I want to add
if the motion is detecde again within 40 sec HIGH pin 12
if the motion is detected again after 70 sec HIGH pin 8
second sensor
motion detected by second motion sensor
&
if the motion is detecde two times within a min HIGH pin 7
if the motion is detected four times HIGH pin 8
(Electronic Bricks Australia | Little Bird Australia
Electronic Brick - PIR Motion Sensor(Digital) SS-ELB106C5M-X)
MY CODE
int ledPin = 13; // LED pin
int motionPinfront = 2; // motion detector input pin
int motionPinrear = 3; // motion detector input pin
int senseMotion = 0; // variable to hold current state of motion detector
int timer = 500;
void setup() {
Serial.begin (9600);
pinMode(ledPin, OUTPUT);
pinMode(motionPinfront, INPUT);
pinMode(motionPinrear, INPUT);
delay (2000);
}
void loop()
{
senseMotion = digitalRead(motionPinfront);
if (senseMotion == HIGH)
{
blinky();
}
delay (timer);
Serial.println (senseMotion);
delay (10);
}
if
{
senseMotion = digitalRead(motionPinrear);
if (senseMotion == HIGH)
{
blinky();
}
delay (timer);
Serial.println (senseMotion);
delay (10);
void blinky()
{
for(int i=0; i<3; i++)/blinks three times/
{
digitalWrite(13,HIGH);
delay(200);
digitalWrite(13,LOW);
delay(200);
}
}