Go Down

Topic: Serial Monitor with remote IP  (Read 328 times) previous topic - next topic

GitFoxy

Hi all,

I'm doing an application where I communicate arduinoIDE and my PC with ubuntu via network.

On my pc with ubuntu I installed telnet and avahi-daemon.

Telnet is listening on port 23.
Avahi-daemon is configured in this way:

<?xml version="1.0" standalone='no'?><!--*-nxml-*-->
<!DOCTYPE service-group SYSTEM "avahi-service.dtd">
<service-group>
   <name >FLUO WI-FI</name>
   <service>
      <type>_arduino._tcp</type>
      <port>80</port>
      <txt-record>board=unowifi</txt-record>
      <txt-record>tcp_check=yes</txt-record>
      <txt-record>ssh_upload=no</txt-record>
      <txt-record>auth_upload=yes</txt-record>
   </service>
</service-group>

On ArduinoIDE I select the board "unowifi", then I select the "IP Address" port, and then I try to open the "Serial Monitor" but I get the following error:

"Serial monitor is not supported on network ports such as 192.168.1.111 for the Arduino Uno WiFi in this release"


What am I doing wrong ?

PaulS

Quote
I'm doing an application where I communicate arduinoIDE and my PC with ubuntu via network.
How are you getting the IDE to communicate with the PC?

The ONLY thing that the IDE can communicate with is a serial port on the PC that it is running on, and the ONLY reason it does that is to upload code to the Arduino.

Quote
What am I doing wrong ?
Just about everything.
The art of getting good answers lies in asking good questions.

Juraj

#2
Sep 17, 2017, 05:39 pm Last Edit: Sep 17, 2017, 05:39 pm by Juraj
Just now I found this Uno WiFi related question.
To access Uno WiFi's factory firmware or esp-link firmware's 'WiFiSerial' output you need a telnet client, not a telnet server.

Go Up