Hey all,
I've had a DFR0009 shield for a while but only today realised which digital pins are broken out. As far as I can tell, they're not documented. The analog pins and a few others on the bottom edge are labelled on the board; for some reason the pins at top-right are not labelled.
The DFR0009 uses digital pins 4-10, which means we should have access to pins 0-3 and 11-13. Well we do... the pins (holes actually) at top-right of the board are, from the right, 0, 1, 2, 3, 11, 12 and 13. See pic below...
Hope this helps other users...