Cheap PCB Fabricate Service(Color Free) !!

Boards from Elecrow just collected from the Post Office. They were sent as signature required, which is another nice touch on top of the emailed photo's and tracking.

I've only had a chance to look at one quickly but the quality looks very good.

I need to get some components soldered in the next few days and test these properly to make sure I've made no mistakes. I'll then report back.

Order placed 29th January. Order received in UK 13th February. Two weeks from order to delivery. :slight_smile:

tack:
Boards from Elecrow just collected from the Post Office. They were sent as signature required, which is another nice touch on top of the emailed photo's and tracking.

not for me, I leave an hour before they open, and get home 2 hours after they close, just stick them in the mailbox, its locked (I live in an apartment)

There is an option to leave comments at checkout. I'm sure you could leave a note to ask them to ship as not requiring signature, due to it being difficult for you due to working hours.

I like the signature touch as it shows they are serious about making sure your items reach you. If there is no signature then there is also no proof where an item may have gone missing in the delivery chain.

Anyway, I've now built the first board and tested it as working well. There are a couple of minor errors on my part, but nothing serious enough to prevent use.

Here's a couple of photo's below. I've also just submitted another 2 orders and will be following with some more in the next day or two. So far I can't recommend them highly enough. They tick all the boxes; Price, Options, Quality, Service, Delivery.

I am going to send them a order later today

well I had an issue with my power jack crashing into my case, and a few other nitpicks, seems procrastination may have paid off as the site is unavailable now

not opps, more like

if you own this site call us cause you dont exist at the moment.

finally ready to order with 100% confidence and well, its off to itead for me

The Elecrow site works ok for me, and I've had an e-mail off them an hour or so ago confirming the tracking number of my latest consignment.

Yes, the site works fine. I've got two more orders that should be arriving in the next few days. The communication from Elecrow during your whole order process is excellent.

well it was down for over a day when I went to order pcb's, what can I say

Just received another order back, bang on 15 days again.

This one was 100mm x 100mm panels with 8 up 48mm x 28mm PCBs panelised.

They tested each individual PCB and marked two on one panel + one on another panel as bad. That's three PCBs out of 80. They actually sent me those panels (with 13 good PCBs) PLUS the full 10 perfect panels, so I've ended up with 93 PCBs instead of 80.

Another order of 5 up tiny PCBs on 50mm x 50mm also arrived with a friend.

These guys are still impressing me. It's not very often nowadays you can be absolutely happy with a service so it's a refreshing change. :slight_smile:

Elecrow. Tried to order boards from your service. The order was $58 and it adds $12 for shipping. In the first post, you mention that you offer free shipping on orders over $50...

thewknd:
Elecrow. Tried to order boards from your service. The order was $58 and it adds $12 for shipping. In the first post, you mention that you offer free shipping on orders over $50...

Drop an email to order@elecrow.com and I'm sure they'll resolve it for you. They have been good in responding to me.

thewknd:
Elecrow. Tried to order boards from your service. The order was $58 and it adds $12 for shipping. In the first post, you mention that you offer free shipping on orders over $50...

Hi Thewknd, really sorry for the miss, we have canceled the free shipping for order over 50 after Chinese Spring festival, and this topic was posted in long time ago, we are didn't modified it, sorry again for the miss. Now, we have do some changes in this post. Thank you.

Best Regards

tack:

thewknd:
Elecrow. Tried to order boards from your service. The order was $58 and it adds $12 for shipping. In the first post, you mention that you offer free shipping on orders over $50...

Drop an email to order@elecrow.com and I'm sure they'll resolve it for you. They have been good in responding to me.

Hi Tack,

Thanks for your trust! we will do our best to give our customer a best service.

Best Regards

I've tested the elecrow service and received my order after 13 days (DHL). Ordered 4 batches with different color/size. They look good at first view. The PCB quality seems comparable to the boards from seeedstudio.

I recently ordered my PCB from OSHPARK (http://oshpark.com). It was 1.25 inch x 1.25 inch double-sided. It cost me US $7.80 for 3 units including shipping, making each PCB cost US $2.60. I ordered on 2nd July 2013, expected to get it back by this weekend. Will keep you posted.

Since this was prototype I am OK with the price. However, once my design is proven I need to be able to get the cost under $1.00 so that I can go for large quantities (50-100).

I am researching options, however, any input are appreciated.

1.25" = 31.75mm.
itead will do 50mmx50mm in 50-lots for $45
http://imall.iteadstudio.com/open-pcb/small-batches-pcb/im120418013.html?options=cart
with $30 for next 50, $25 for each 50 after that.

Shipping likely dependent on weight, via DHL I think for the larger weights. (vs USPS Registered airmail). Go thru the order process to confirm.

Thanks CrossRoads,
I did receive my PCB's last week, yet to get to soldering them. They look great. I will put a pic soon.
Just the problem that edges are not smooth. Probably due to de-paneling at their site I guess.
I need edges to be exact 31.75mm so that it fits behind 32mmx32mm LED matrix. Now they are coming out a little bit :frowning:
I am not equipped for cutting edges of PCB, especially as tracks are very close to edges.
Any ideas?

Thanks.

get a file, or a table mounted belt sander, it wont take long either way

I tape some sandpaper down to the top of a table.. and have at it with any odd-ball edges that arent smooth..

Elecrow can support adding V-groove in one panel for same copies.
Here is a tutorial for how to panelize boards with CAM350.
http://www.elecrow.com/wiki/index.php?title=How_to_panelize_PCBs_with_CAM350#Over_View
Hope you find it useful!