Go Down

Topic: UNO + Dragino 2.4 - memory expand nightmare - need help :( (Read 34 times) previous topic - next topic

oldorange

Mar 20, 2017, 08:00 pm Last Edit: Mar 20, 2017, 08:05 pm by oldorange Reason: wrong format of the Code-Section
Hi,

i have been trying to expand the memory of the Dragino Shield v2.4 with a USB-Stick but after weeks of reading instructions and looking through forums i couldn't make it.

The problem is that with the few kilobytes of free space (800KB) the packages  of the YunDiskExpander-script cannot install at all. These three packages should be installed:

libsmartcols.
libext2fs.
e2fsprogs.

Here's the output when i run the expand.sh script:

Code: [Select]
root@dragino-anus:/tmp# /bin/ash expand.sh sdb
Downloading http://www.dragino.com/downloads/downloads/motherboards/ms14/Firmware/packages-cc/packages/base/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_base.
Downloading http://www.dragino.com/downloads/downloads/motherboards/ms14/Firmware/packages-cc/packages/luci/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_luci.
Downloading http://www.dragino.com/downloads/downloads/motherboards/ms14/Firmware/packages-cc/packages/management/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_management.
Downloading http://www.dragino.com/downloads/downloads/motherboards/ms14/Firmware/packages-cc/packages/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_packages.
Downloading http://www.dragino.com/downloads/downloads/motherboards/ms14/Firmware/packages-cc/packages/routing/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_routing.
Downloading http://www.dragino.com/downloads/downloads/motherboards/ms14/Firmware/packages-cc/packages/telephony/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_telephony.
Downloading http://www.dragino.com/downloads/downloads/motherboards/ms14/Firmware/packages-cc/packages/dragino/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_dragino.
Downloading http://www.dragino.com/downloads/std/bb-iot-pkg/alljoyn/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_alljoyn.
Downloading http://www.dragino.com/downloads/downloads/motherboards/ms14/Firmware/packages-cc/packages/custom/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_custom.
Downloading http://www.dragino.com/downloads/downloads/motherboards/ms14/Firmware/packages-cc/packages/arduino/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_arduino.
Installing e2fsprogs (1.42.12-1) to root...
Downloading http://www.dragino.com/downloads/downloads/motherboards/ms14/Firmware/packages-cc/packages/base/e2fsprogs_1.42.12-1_ar71xx.ipk.
Installing libext2fs (1.42.12-1) to root...
Downloading http://www.dragino.com/downloads/downloads/motherboards/ms14/Firmware/packages-cc/packages/base/libext2fs_1.42.12-1_ar71xx.ipk.
Installing fdisk (2.25.2-4) to root...
Downloading http://www.dragino.com/downloads/downloads/motherboards/ms14/Firmware/packages-cc/packages/base/fdisk_2.25.2-4_ar71xx.ipk.
Installing libsmartcols (2.25.2-4) to root...
Downloading http://www.dragino.com/downloads/downloads/motherboards/ms14/Firmware/packages-cc/packages/base/libsmartcols_2.25.2-4_ar71xx.ipk.
Configuring libsmartcols.
Configuring libext2fs.
Configuring e2fsprogs.
Collected errors:
 * pkg_write_filelist: Failed to open //usr/lib/opkg/info/fdisk.list: No space left on device.
 * opkg_install_pkg: Failed to extract data files for fdisk. Package debris may remain!
 * opkg_install_cmd: Cannot install package fdisk.
 * opkg_conf_write_status_files: Can't open status file //usr/lib/opkg/status: No space left on device.
expand.sh: line 14: fdisk: Permission denied
/dev/sdb not found!

I hope you can help me with these Information - This is my first time i post a topic in a forum so please tell me if i missed something.


spycatcher2k

Quote
This is my first time i post a topic in a forum so please tell me if i missed something.
Yes you did - Dragino's support forum!
Drew.
http://www.uk-pcb.co.uk - My UK Based PCB Fab & Assembly Company
Design & Assembly work undertaken - Arduino repairs & testing - PM for details. PM me for non repair or testing, 1 to 1 support and I will charge you - beware!

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy