Show Posts
Pages: [1] 2 3 4
1  Using Arduino / Project Guidance / Re: Should I be able to perform a loopback test with SoftwareSerial? on: February 02, 2014, 10:48:50 am
Thanks. I just realized that in the middle of the night. It's interrupt driven, and ATMega has only 1 level of interrupt.

Thanks again,
Michael
2  Using Arduino / Project Guidance / Should I be able to perform a loopback test with SoftwareSerial? on: February 01, 2014, 06:43:47 pm
I'm running the SoftwareSerialExample unmodified. I connect pin 10 to pin 11 and open the serial monitor. For reference, here is the loop function:

Code:
  if (mySerial.available())
    Serial.write(mySerial.read());
  if (Serial.available())
    mySerial.write(Serial.read());

I expected that if I type anything on the  serial monitor input line, it would show up in the serial monitor output area. Instead, I get nothing.

I read the limitation that only one software serial port can be read at a time, but I'm only using one.

What am I doing wrong?
3  Using Arduino / Programming Questions / MOVED: Charger un programme issue d'une carte SD. on: May 23, 2013, 10:49:11 am
This topic has been moved to RĂ©alisations et Projets Finis.

http://forum.arduino.cc/index.php?topic=167956.0
4  Using Arduino / Programming Questions / MOVED: Temperatura - HELP on: May 23, 2013, 10:35:54 am
This topic has been moved to Project Guidance. since it has no code it belongs in the more generic project guidance section.

http://forum.arduino.cc/index.php?topic=167927.0
5  Using Arduino / Programming Questions / MOVED: Light organ with software filter for different spectrums. on: April 10, 2013, 12:38:14 pm
This topic has been moved to Project Guidance.

http://arduino.cc/forum/index.php?topic=159676.0 since there is no code, this rightly belongs in the project guidance section. Thanks!
6  Using Arduino / Programming Questions / MOVED: Read Arduino from JavaScript on: March 31, 2013, 01:26:24 pm
This topic has been moved to Project Guidance.

http://arduino.cc/forum/index.php?topic=157563.0 because there is no code in your question, it belongs in the broader category of "project guidance"
7  Using Arduino / Motors, Mechanics, and Power / Re: aproblem with esc ????????? please help me on: March 12, 2013, 02:14:01 pm
Hi Mahmoud,

Welcome to the forum. We will do our best to help you. However, we need more details about your hardware and software before we can help. Please follow the guidelines here to help us help you:

How to use this forum

At the very least, answer the 3 questions that AWOL indicated and we'll see what we can figure out.

Looking forward to schematics, part numbers, and code, and then we'll get to work.

Sincerely,
Michael
8  Using Arduino / Programming Questions / MOVED: Error: "avrdude: stk500_getsync(): not in sync: resp=0xfe" on: February 22, 2013, 07:17:17 pm
This topic has been moved to Software.

http://arduino.cc/forum/index.php?topic=150317.0
9  Using Arduino / Project Guidance / MOVED: Problemi Arduino standalone on: February 20, 2013, 02:10:16 pm
This topic has been moved to Generale.

http://arduino.cc/forum/index.php?topic=150009.0
10  Using Arduino / General Electronics / MOVED: Debouncing and toggle led using pushbutton problem on: February 17, 2013, 06:15:01 pm
This topic has been moved to Programming Questions.
moved to programming for it is a programming question
http://arduino.cc/forum/index.php?topic=149536.0
11  Using Arduino / Project Guidance / MOVED: ControlCore Visual Programing Environment for Arduino on: February 02, 2013, 11:35:42 am
This topic has been moved to Products and Services.

http://arduino.cc/forum/index.php?topic=146249.0
12  International / Deutsch / MOVED: Seriale input vertalen naar dat voor Servo on: January 24, 2013, 05:18:21 pm
This topic has been moved to Nederlands. sorry, i see it was already in the right place

http://arduino.cc/forum/index.php?topic=144444.0
13  International / Nederlands / MOVED: Seriale input vertalen naar dat voor Servo on: January 24, 2013, 05:17:21 pm
This topic has been moved to Deutsch. We don't seem to have a Dutch section so I put it in German because I thought it might be the most likely understood place.

http://arduino.cc/forum/index.php?topic=144444.0
14  Using Arduino / Programming Questions / Re: ERROR!!! on: January 22, 2013, 02:41:44 pm
Please let's not call anyone trolls on the forum. If you have such suspicion, make it to the moderators, not to the forum.

To the original poster: It does appear that you have a lot to learn before you can do a project that is longer than one screen.

I suggest you review all the tutorials you can find on the Arduino or other websites such as

http://arduino.cc/en/Tutorial/HomePage
http://learn.adafruit.com/
http://itp.nyu.edu/physcomp/Intro/HomePage
http://tronixstuff.wordpress.com/
http://todbot.com/blog/spookyarduino/

Study well program structure, do all the exercises and understand them.

When you have done this you are ready to embark on your own project.   Create a MINIMAL test for your LCD project; by minimal I mean code that will fit on one screen. Understand exactly what it is supposed to do, and then if it doesn't work come back here and we'll try to help you.

Best wishes,
Michael
15  General Category / General Discussion / Re: I was logged in as someone else WTF? on: January 21, 2013, 01:24:13 pm
Thanks for the report. We are looking into it.

Pages: [1] 2 3 4