finally i have this schematic.. i removed the unnecessary elements.

Can you please tell me if this schematic is ok? or i need to remove more thing unnecessary ? or add something else?

Thanks

i attached a foto from the prototype too

Yes, I have this FTDI

http://store.arduino.cc/eu/index.php?main_page=product_info&cPath=11_12&products_id=143

Thanks

umm thanks this is a littler hard for me. i am using the same components that the Arduino Ethernet Board  the crystal is the same and the J1 is the same FTDI Basic that the Ardu Eht board.

   i want the power through POE... can i download the scketch through FTDI ?

attached  the schematic eagle file and the arduino ethernet board eagle file too..

thanks for your help

somebody help me ?

Hi..

    I think i removed all componets unnecessary.

    Please, can you check the Schematic and tell me if i can removed more component unnecessary?


    can i do the board with this componentes?

Hi.

    I need help with the schematic of the folowing PIR module for add to a new project.

http://4.bp.blogspot.com/_qNYfArYqKXU/TIu1-EQGFzI/AAAAAAAAAVM/0FpLYUVLr6A/s1600/DC-SS015-component-side.png

    someone can help me find this schematic?

Thanks you!

hello, cyclegadget

    Yes, i know that. my prototype is over this board... but i want make my own board only using the necessary componentes that arduino ethernet have...

     The schematic that i put in my last post is a modification of Arduino Ethernet board.

CrossRoads. i am in a good way??? good!!!! Now i will add the PIR sensor etc etc..

    
Thanks

i have the following schematic.

I modified the arduino ethernet removing all components unnecessaries. only need to add the PIR sensor.

is good way to to get what I want?

I am trying to desing the schematic... I will tell you something

Thanks you very much

yes, that is what i want.... i thinks is better the arduino ethernet and modify/remove or add the components that i need. but that is my problem.... here i am lost.. i dont know  whats remove or how add.

I'm trying to make the schematic with eagle but i am lost.. i dont know the element the i need for create the board...

    I did the prototype in FRITZING is to simple... i acept improvements 

    ahhh remenber that the infrared sensor is not a realy infrared... is a PIR SENSOR is just that in Fritzing is not the PIR sensor

    i attach too the schematic that Fritzing generate...

    I want make the schematic correctly... with only the things that i use...... I am grateful if someone can help me do it.

Big Thanks!!

Thanks... i will try to desing the schematic..

ok, let me try... is the first time i use eagle.. for this reason ask for some disingner....

i use the this PIR http://www.ebay.es/itm/170842963267?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_1635wt_1180

and the power for the moment is the USB power but i want add POE or a rechargable solar batery.... i need  study this part.

Regards

yes i have the ethernet shield connected to the arduino uno and the PIR sensor connected too.

   i want make a board using only the PINs that i use. The microcontroler, the PIR SENSOR and ETH SHIELD for reach a small device

Regards

Hello
     I made my first prototype, is a simple project that I want to accomplish. I have finished the prototype, it is an Arduino uno + ethernet shield with a motion sensor, and the function is detect movement and send a notification for internet.

      I want to create a PCB with the included motion sensor and only with elements I used in the prototype. for example only the PINS i use (PIN: 2, GND, 5v) etc. is for reduce the size and make a small device.

      Someone can help me design the EAGLE FILE? promissory for it.

thanks