Show Posts
Pages: [1]
1  Topics / Home Automation and Networked Objects / Re: HELP - Arduino + Ethernet Shield - Button Just work with Internet Explorer on: November 06, 2012, 09:26:10 pm
thank you very much  smiley
Your tip helped me a lot.
It's all going well

How to have a username and password before accessing these commands? smiley-sweat
hug
2  Topics / Home Automation and Networked Objects / Re: HELP - Arduino + Ethernet Shield - Button Just work with Internet Explorer on: July 30, 2012, 06:04:43 pm
Anybody?
How i put different buttons ??? thank
3  Topics / Home Automation and Networked Objects / HELP - Arduino + Ethernet Shield - Button Just work with Internet Explorer on: July 30, 2012, 02:04:44 pm
Hi guys.
I'm using an Arduino Duemilanove + Ethernet Shield W5100
Clicking the buttons, the code is sent in the url and the arduino read and makes the action of turning on or off.
The project is working, but only with internet explorer. With other browsers like monzila firefox, google chrome and my phone is not working.
I would like to thank ZOOMKAT. I modified the his codes, to access more ports

what am i doing wrong here?
thank

The arduino code:
Code:
#include <SPI.h>
#include <Ethernet.h>

int LuzFrente       =2;
int LuzCozinha      =3;
int Portao          =4;
int PortaoFrente    =5;
int PortaoCozinha   =6;
int LuzSala         =7;
int LuzQuarto       =8;


byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; //physical mac address
byte ip[] = { 192, 168, 2, 102 }; // ip in lan
byte gateway[] = { 192, 168, 2, 1 }; // internet access via router
byte subnet[] = { 255, 255, 255, 0 }; //subnet mask
EthernetServer server(84); //server port

String readString;

//////////////////////

void setup(){

  pinMode(LuzFrente, OUTPUT); //pin selected to control
  pinMode(LuzCozinha, OUTPUT);
  pinMode(Portao, OUTPUT);
  pinMode(PortaoFrente, OUTPUT);
  pinMode(PortaoCozinha, OUTPUT);
  pinMode(LuzSala, OUTPUT);
  pinMode(LuzQuarto, OUTPUT);
 
  //start Ethernet   
  Ethernet.begin(mac, ip, gateway, subnet);
  server.begin();

 
  //enable serial data print
  Serial.begin(9600);
  Serial.println("server LED test 1.0"); // so I can keep track of what is loaded
}

void loop(){
  // Create a client connection
  EthernetClient client = server.available();
  if (client) {
    while (client.connected()) {
      if (client.available()) {
        char c = client.read();

        //read char by char HTTP request
        if (readString.length() < 100) {

          //store characters to string
          readString += c;
          //Serial.print(c);
        }

        //if HTTP request has ended
        if (c == '\n') {

          ///////////////
          Serial.println(readString); //print to serial monitor for debuging

          client.println("HTTP/1.1 200 OK"); //send new page
          client.println("Content-Type: text/html");
          client.println();

          client.println("<HTML>");
          client.println("<HEAD>");
          client.println("<TITLE>PROJETO 2012 HSH KEVIN</TITLE>"); // NOME QUE APARECE NO NAVEGADOR
          client.println("</HEAD>");
          client.println("<BODY>");

          client.println("<H1>Automacao Projeto 2012 HSH</H1>");
         
          client.println("<H3>Luz Da Frente</H3>");
          client.println("<br><input type=\"button\" value=\"ON\" onmousedown=\"location.href ('/?2on');\"/>");
          client.println("<input type=\"button\" value=\"OFF\" onmousedown=\"location.href ('/?2off');\"/>");       
 
         
          client.println("<H3>Luz Da Cozinha</H3>");
          client.println("<br><input type=\"button\" value=\"ON\" onmousedown=\"location.href ('/?3on');\"/>");
          client.println("<input type=\"button\" value=\"OFF\" onmousedown=\"location.href ('/?3off');\"/>");
         
         
          client.println("<H3>Portao</H3>");
          client.println("<br><input type=\"button\" value=\"ON\" onmousedown=\"location.href ('/?4on');\"/>");
          client.println("<input type=\"button\" value=\"OFF\" onmousedown=\"location.href ('/?4off');\"/>");       
 
         
          client.println("<H3>Portao Frente</H3>");
          client.println("<br><input type=\"button\" value=\"ON\" onmousedown=\"location.href ('/?5on');\"/>");
          client.println("<input type=\"button\" value=\"OFF\" onmousedown=\"location.href ('/?5off');\"/>");
         
         
          client.println("<H3>Portao Cozinha</H3>");
          client.println("<br><input type=\"button\" value=\"ON\" onmousedown=\"location.href ('/?6on');\"/>");
          client.println("<input type=\"button\" value=\"OFF\" onmousedown=\"location.href ('/?6off');\"/>");
         
          client.println("<H3>Luz Sala</H3>");
          client.println("<br><input type=\"button\" value=\"ON\" onmousedown=\"location.href ('/?7on');\"/>");
          client.println("<input type=\"button\" value=\"OFF\" onmousedown=\"location.href ('/?7off');\"/>");       
 
                                           
                   
          client.println("</BODY>");
          client.println("</HTML>");
 
         
          delay(1);
          //stopping client
          client.stop();

          ///////////////////// control arduino pin
          if(readString.indexOf("2on") >0)//checks for on
          {
           
            digitalWrite(2, HIGH);    // set pin 2 high
            Serial.println("LuzSala On");
          }
          if(readString.indexOf("2off") >0)//checks for off
          {
           
            digitalWrite(2, LOW);    // set pin 2 low
            Serial.println("LuzSala Off");
          }
         
          if(readString.indexOf("3on") >0)//checks for on
          {
            digitalWrite(3, HIGH);    // set pin 3 high
            Serial.println("LuzCozinha On");
          }
          if(readString.indexOf("3off") >0)//checks for off
          {
            digitalWrite(3, LOW);    // set pin 3 low
            Serial.println("LuzCozinha Off");
          }
         
          if(readString.indexOf("4on") >0)//checks for on
          {
            digitalWrite(4, HIGH);    // set pin 4 high
            Serial.println("Portao On");
          }
          if(readString.indexOf("4off") >0)//checks for off
          {
            digitalWrite(4, LOW);    // set pin 4 low
            Serial.println("Portao Off");
          }
         
          if(readString.indexOf("5on") >0)//checks for on
          {
            digitalWrite(5, HIGH);    // set pin 5 high
            Serial.println("PortaoFrente On");
          }
          if(readString.indexOf("5off") >0)//checks for off
          {
            digitalWrite(5, LOW);    // set pin 5 low
            Serial.println("PortaoFrente Off");
          }
          if(readString.indexOf("6on") >0)//checks for on
          {
            digitalWrite(6, HIGH);    // set pin 6 high
            Serial.println("PortaoCozinha On");
          }
          if(readString.indexOf("6off") >0)//checks for off
          {
            digitalWrite(6, LOW);    // set pin 7 low
            Serial.println("LuzSala Off");
          }
          if(readString.indexOf("7on") >0)//checks for on
          {
            digitalWrite(7, HIGH);    // set pin 6 high
            Serial.println("PortaoCozinha On");
          }
          if(readString.indexOf("7off") >0)//checks for off
          {
            digitalWrite(7, LOW);    // set pin 7 low
            Serial.println("LuzSala Off");
          }
         
                     
         
         
          //clearing string for next read
          readString="";

        }
      }
    }
  }
}



Pages: [1]